PENETRATING OIL
INTRODUCTION:
This is a lubricant formulated for lubricating joints, contact point, movable contacts etc. it is used in the industries as well as workshops and other working places where machines and equipment are in factories.
RAW MATERIALS:
1. Acetic Acid
2. Gasoline oil
3. Minerals oil
4. Carbon Tetrachloride
5. Kerosene
6. Amyl Acetate
7. Vegetable oil etc.
EQUIPMENT:
1. Weighing scale or measuring device
2. Mixer-manual or motorized
3. Filling Device
4. Others as required
FORMULATIONS:
1. Carbon Tetrachloride - 2 parts e.g. 10 litres
Acetic Acid - 1 part e.g. 5 litres
Gasoline oil - 2 parts e.g. 10 litres
Mineral oil - 4 parts e.g. 20 litres
TOTAL 45 litres
2. Mineral oil - 1 parte.g. 10 litres
Kerosine - 1 part e.g. 10 litres
Amyl Acetate - 1.5 parts e.g 15 litres
TOTAL 3.5 parts 35 litres
PRODUCTION:- Measure out all the ingredients and mix according to the formulation in a speed or manual mixer for about 30 minutes.
Quality parameters:
Compare with a standard in the market or test in an approved quality assurance laboratory.
No comments:
Post a Comment